06-22-2015 - Special City of Edgewater 104 Riverside Drive
Y g Edgewater, FL 32132
61V�
P ACS+taf
Meeting Agenda
City Council
Michael Ignasiak, Mayor
Christine Power, District 1
Gigi Bennington, District 2
Dan Blazi,District 3
Gary T. Conroy,District 4
Monday,June 22,2015 7:00 PM Council Chambers
Special Meeting
City Council will hold a Special Meeting immediatley following the 6:00 p.m. Budget Workshop on
June 22,2015.
We respectfully request that all electronic devices are set for no audible notification.
1. CALL TO ORDER,ROLL CALL
2. OTHER BUSINESS
a. AR-2015-975 Addition of a Transport Rescue Unit
Attachments: Quote Letter City of Edgewater Intl 060315
Work Specs City of Edgewater Intl 051415
3. ADJOURN
Pursuant to Chapter 286, F.S., if an individual decides to appeal any decision made with respect to any
matter considered at a meeting or hearing, that individual will need a record of the proceedings and
will need to ensure that a verbatim record of the proceedings is made. The City does not prepare or
provide such record.
In accordance with the Americans with Disabilities Act,persons needing assistance to participate in
any of these proceedings should contact City Clerk Bonnie Wenzel, 104 N. Riverside Drive, Edgewater,
Florida, telephone number 386-424-2400 x 1101, 5 days prior to the meeting date. If you are hearing
or voice impaired, contact the relay operator at 1-800-955-8771.
City of Edgewater Page 1 Printed on 71912015
104 N. Riverside Drive
City of Edgewater Edgewater, FL 32132
Legislation Text
File #: AR-2015-975, Version: 1
COUNCIL AGENDA ITEM
SUBJECT:
Addition of a Transport Rescue Unit
DEPARTMENT:
Finance
SUMMARY:
The Fire Rescue Department has been relying on the current Rescue 57 as a full time transport unit supplementing
Rescue 55. Rescue 57 is 11 years old with 121,487 miles and has extended down time due to age. This Rescue is a
front line piece of equipment that is utilized as part of the current Transport Program. On multiple occasions this Rescue
has had mechanical breakdowns during a call. The addition of this Rescue will reduce down time, repair cost and
increased reliability as we are currently running two full time Transport Rescues. The addition of this unit will place
Rescue 57 into a reserve backup unit during maintenance of one of the two primary units.
If we purchase this unit prior to July 1, 2015 there will be significant savings due to change in industry requirements.
This additional unit will be funded by a capital lease that will be brought before council at a later date. The estimated
delivery time of this unit will be October 2015. The lease will be paid from transport revenues received.
BUDGETED ITEM: ❑ Yes ® No ❑ Not Applicable
BUDGET AMENDMENT REQUIRED: ® Yes ❑ No ❑ Not Applicable
RECOMMENDED ACTION:
Motion to approve the purchase of an additional Transport Rescue unit in an amount not to exceed $248,310 and
authorize the City Manager to enter into a capital lease per the Purchasing Policy and approve the associated budget
amendments
City of Edgewater Page 1 of 1 Printed on 7/9/2015
pow[lod by I ogiFfl ar nvl
'J& Wheeled QUOTE
Rick Schoppe, District Sales Manager Date: June 3,2015
Cell: (407) 907-2444 QUOTE # 207COE
E-mail: rick.schoppe@wheeledcoach.com I xjpin i I lon 1)(�i I o� OR/14/15
For: Lieutenant Jason
Haynes/Chief Stephen
Cousins
City of Edgewater FIR
1605 Ridgewood Ave
Edgewater,FL 32132
Customer ID:EDGE001
Salesperson Shipping Method Estimated Delivery Date Payment Terms F.O.B.
TBD
chassis ................................................... ..........................................
S-CHOP;E T-B-D............................................... ch ays after receipt of
Qty Description Unit Price Discount Line Total
One (1) 2016 International 4300 2 door,MaxxForce DT
I 260-HP diesel,Allison EVS-3000 transmission WB/Wheeled $248,310 (included) $248,310
Coach Industries Firemedic 9170FL custom ambulance
.. ......... . ......... .......
............ .....................",'','""........... ............
................................................................. .................................................................
Additional options not included in quote:
--------------------,""I'll",------------------------------------------ ----------
----------------------- -------------------------------------------- -----------
Ferno Stat-Track system,installed $2,711
-------------11----------- ------------------ ----------- -------------
--------------1-11,111-1----------,""I'll",- ---------- --------......................................................................................................................
,
Stryker#6390 Power LOAD system,installed $25 906
------------- -----------I"I'l""I'll""I'll'll""I'll""I---------- -----------------------
-------------"I'll-----------------------------------------------------"I'll",----------------------
Stryker 6506 Power Pro XT Cot $15,119
................. .. ..............
..
Total Discount
..................................................................................................................................
t
.................................................................................................................................
Subtotal
.............................................................
Sales Tax
..................................................................
Total
.................................................................
Quotation authorized by:
This is a quotation on the above named goods following the specifications and information contained with this proposal form.
Your order for the above said ambulance(s) will be entered upon receipt of signed Wheeled Coach Sales Agreement or binding
Municipal Purchase Order.
Thank you for your interest in Wheeled Coach Ambulances!!!
Corporate Office: 2737 N.Forsyth Road, Winter Park, FL 32792•Phone (407) 677-7777• Fax(407) 679-1337
. ... . " QUOTATION
City of Edgewater Wheeled Coach Industries, Inc.
Jason Haynes Rick Schoppe
Exp. Date: 06/05/2015
Quote No: EDGEINTL-0001
05/14/2015 09:21:25 WO#: Page 1
PART NO S DESCRIPTION QTY
-- International, (SO) 170" Module, Custom -620.022 03/26/15 == 1
CHASSIS: 1
00-90-OOSR X < 2016 International 2 door, extended cab 1
See specs
SR -215477
CAB TO MODULE MOUNTING: 1
10-11-0000 < > Bellows, Passthru, Unigrip, International, Std 1
with aluminum cab insert.
15-10-0000 BASE BILL OF MATERIALS 1
15-11-9873 < 2015, Base, International,170" Module, Standard Model 2015-4 1
(new code)
SUSPENSION: 1
1 F-30-7900 < > Auto Dump w/override Sw, For Air Suspension 1
dump feature to be activated by left rear entry door.
Override switch to be recessed in cabt, near right rear
entry door.
Ignition switch hot, std.
1 F-31-4010 < > Suspension, OEM, Installed, Int'I, w/OEM Sw in Dash 1
Only to dump in neutral w/park brake set.
OEM air gauge in dash.
OEM automatic heated expello valve
ALTERNATOR(S): 1
1 K-40-5000 > Alternator,OEM 1
THROTTLE CONTROLS: 1
1 P-50-5520 < > High Idle Controls, OEM, Int'I 1
High idle to activate automatically with low voltage.
(per WC std Int'I chassis program)
CAB STEP: 1
20-60-2010 Cover, Fuel Tank, Dia Plate, INTL,4200-4400 SBALP 1
20-60-20SR X < Custom compartments, ext cab steps 1
Custom compartments, ext cab steps p/s & d/s compartment with drop down doors.
Compartment opening to be 18"x12"
SR-215484
20-60-21 SR X Scorpion coating each compartment 1
CHASSIS ADD ONS, MISC 1
2F-71-3710 < Highbeam Flasher, Diamond Logic, Dual Mode 1
Dual Mode Hi h Beam Flasher
05/14/2015 09:21:25 WO#: Pa e 2
PART NO S DESCRIPTION QTY
Mode 1: Alternating 80 FPM
Mode 2: Alternating 80 FPM, Simultaneous 80 FPM, Double Flash 120 FPM
2F-76-85SR X < Door, Roll-up, Robinson, Extended Cab 1
SR#215116F
One (1) on each side of extended cab.
Note: Bar type handle (full width)
Note:With electric and manual keyed locks connected to OEM door lock switches.
Note: Please make sure the flat door gasket for roll up door is installed in correct location,
so that it seals against the weather strip that is located on top extruded aluminum flange
of roll up door.
Note: Please make sure all wiring for the electric locks, for the roll up doors, is run in
loom; and grommets are installed where wiring runs thru the compartment walls. No wiring
is to be run thru the tracks or protruding in or out of the tracks, that would be smashed by
opening and closing the roll up doors, All wiring entering or exiting the compartment shall
be sealed with caulking.
2F-76-87SR X < Compts, (2), Extended Cab, Freightliner 1
(SR#215116F
Note: One (1) compartment shall be on each side of extended cab.
Note: 12 gauge, Minimum 40" High X 20"Wide x 28" Deep.
Note: 30"deep, 45 degree angle bracket in rear corner,
towards rear of cab, for SCBA mounting,
Note: Scorpion light gray coating.
Note: Sweep out floors.
Note: Compartments shall be lighted with LED Hi-Brite Flex
lighting on ceiling only. The LED rope lighting shall be
activated when opening Robinson Roll-up door.
Note: Each compartment shall have two (2) supports welded
between cab floor and rear corners.
Note: Each compartment shall have a 5 degree slope on floor to facilitate drainage towards
roll-up door.
Note: Cover exteriors walls of compartments, inside of cab, with 3/4" thick plywood with
Mica color TBD.
Note: Carpeted trim panels at top edge of mica covered exterior walls of compartments
shall be raised above top edge by approximately 1"to create a lip around top.
Note: Headset jacks shall be installed at bottom edge of carpeted trim panels.
2F-76-SR00 X < Slide out tool tray extended cab chassis 1
Slide out tool tray extended cab chassis - compartment with slide out tool tray. chassis
ordered with roll up doors already installed in D/S& P/S of cab.
Install flat finish aluminum walls inside cab to provide storage for roll up doors. Zolotone
finish applied to inside compt walls.
install two compartment lights wall #1 and wall #2 in each compartment
05/14/2015 09:21:25 WO#: Pa e 3
PART NO S DESCRIPTION QTY
two (2) slide out tool boards with retractable gas struts that hold the board in both "in"and
"out" position -one tool board in each cab extension
mount the boards to the rear of each opening - using at least 2 rated slides per board - DA
finish on tool boards
install two chorme handles on each tool board
SR -215477
35-10-05SR X < 96" body width with 43-44" aisle width 1
SR#215116F
HEATING/AIR CONDITIONING: 1
5U-12-5000 > Hoses, Heater, No Max, to Rear, STD 1
51-1-14-11 SR X < Custom location of Combo A/C/Heat 1
Custom location of Combo A/C/Heat
relocate combo unit to driver's side front of unit. External condensor to be mounted on
front of cab.
Locate over custom height cmpt F
51-1-70-0916 < > Heat/AC, Int'I, Combo, 12vdc/110vac, (2) Top Mount Ext Cond 1
(new code)
CM3000 thermostat in action area.
110vac air conditioner
110vac External Condenser, mounted on front of module
110vac heat strips(approx 1700 watt)
12vdc air conditioner
12vdc External Condenser, mounted on front of module
With painted condenser bracket.
Specify paint code
With IATS 30amp shoreline inlet (separate option code)
51-1-80-1000 < Inlet, Auto Eject, 30amp, White, for 12v/110v AC unit 1
(new code)
above compt"E"(unless otherwise specified)
BATTERY SWITCHES: 1
60-22-1080 < Battery Sw, 5min Timer, Int'I, Fig 5B 1
Activated thru OEM ignition switch timer function upon
ignition "off".
Momentary rocker switch, on driver's side of cab console,
to function as timer shutoff and also reactivate timer.
OEM batteries in slideout tray below driver's door.
ONLY Module power is turned on/off.
Chassis power is NOT turned off.
BATTERY TRAY: 1
60-40-2500 < > Tray,(2-4) Battery,Slide-Out,(2)Gator Grip Steps, Std, Int'I 1
w/turtle-tile installed in bottom of tray
CONSOLES: 1
71-1-10-7000 Console, A/A, Wood, Angled 1
7U-10-70SR X < Custom Console 1
Custom console - custom angled portion to house two radios, 11 0V A/C control, siren and
05/14/2015 09:21:25 WO#: Pa e 4
PART NO S DESCRIPTION QTY
Hrecom control head
area to rear of angled portion to contain cup holders and three sections for notebooks -
spray with Linex
7U-10-71 SR X < relocate cab switches to OEM dash 1
relocate cab switches to OEM dash (Ref. Casselberry 339028)
7U-12-5010 > Console, Walkthru, International 4200-4400 SBALP, STD 1
SIREN SPEAKERS: 1
DF-10-6112 > Speakers, Cast, in Bumper, Int'I, Std, 2008+ 1
GRILLE LIGHT HOUSINGS: 1
H5-60-1000 Housings, Whelen 73 Lts, Pair, 4300/4400 Intntl, STD 1
--Type 9- 170" Module, Custom Series-620.022 03/26/15 == 1
RUSTPROOFING/ UNDERCOATING: 1
35-05-0300 Type 9 - 170" Module -Custom Series 1
35-05-0310 Type 9 - 170" Module General Body Construction Spec 1
35-05-0320 Type 9 - 170" Module Vehicle Body Structure Spec 1
35-05-2000 INTERIOR CABINETS-Duralite Construction, Wood 1
MODULE BODIES: 1
35-10-0064 < Aisle Space, per KKK, STD 1
Install anti-slip decal with Wheeled Coach logo on curbside and rear stainless steel
thresholds, STD
35-10-OOSR X < Custom Body 1
Custom Body - chassis to have vertical exhaust on C/S. Will require outboard lights on
mod front to be moved inward
Curbside door moved forward to front of mod. C/S entry door minimum size 32"x 74"
ALS Cmpt A door to be 24"x 60"
delete B2 and widen & raise B cmpt 35"wide x 30"tall
cmpt D 7/8 tall x 3"wide
narrow cmpt E 34"wide x 40"tall
custom cmpt F with double doors. compt width F 39" wide x 72"tall. leading forward door
to be @25"wide and trailing door to be @14"wide
false bottom of rear 14" towards rear to store two D cylinders. above false bottom near
wall #3 will be storage for main 02
area near wall #1 and wall #2 will be for storage of CAF system on cmpt bottom and
Hannay reel attached to ceiling of cmpt F
chassis will have 22.5"wheels
Electrical cabinet to be located on the back side of cmpt F
35-10-01 SR X < Compressed Air Foam System 1
Compressed air foam system - CAF System, TriMax Vertical 30 CAF System
Install one SCBA bracket (Zico p/n SC-50-H-6-SFPHS) to hold charging cylinder a scott 45
minute bottle
connect CAF system to hannay hose reel
reinforce compartment bottom
35-10-02SR X < Hannay hose reel for Trimax foam system 1
Hannay hose reel for Trimax foam system
Install EF4024-17-18 reel w/100' of 3/4" booster hose
reinforce compartment ceiling to support Hannay Hose reel
Install hose reel guide w/three rollers (bottom and sides) for hose reel
35-10-0962 > Headroom, 72" H.R. Type 9 - 170" module Standard Model 1
37-00-0350 < Coating, Scorpion X02, Per Compt, (1), Std 6
light gray
Machine stamped louvers located above the floor line for venting
05/14/2015 09:21:25 WO#: Pa e 5
PART NO S DESCRIPTION QTY
37-00-0360 Coating, Scorpion, Rear Bumper Supports 1
37-00-0710 < Duraseam Doors, with Hidden Jambs 1
- Magnetic door switches, Standard
37-00-0900 < > Compartments, Std, Floor 3" Drop Down from Door Opening, MAV 5
compts A, B1,B2,D,& E are STD drop down floor
37-00-1000 < > Compartments, Sweepout , MAV 1
compt "F" std sweep out, 13"from wall #3
3C-00-0000 < > Type 9 - 170" Module, EMS 1
With 0.125 module skins, std.
3D-AO-0450 < > A, Compt, Std, Hoseline, 170" Module, T9, EMS, 72" H.R. 1
w/single door
3D-B1-0450 < B1, Compt, Widened and Raised, 170" Module, T9, 72" H.R 1
Raised to the top of the squad bench.
Double doors.
3D-B2-0200 B2, Compt, Deleted, 170" Module, T9, 72" H.R. 1
3D-DO-0500 < D, Compt, 7/8, 170" Module, T9, 72" H.R 1
With Double Doors
3D-EO-0100 < E, Compt, Std, 170" Module, T9 1
With Double Doors
3D-FO-0272 < F, Compt, Std, 7/8 Height, 170" Module, T9, 72" H.R. 1
Std compt"F"w/single door.
Compt"F"to be sweepout 13"from wall #3 for 02, std
EXTERIOR DIVIDERS: 1
3F-10-1100 < Divider, Vertical, B2, 3/16"Thick 4
(divider to be full depth if a shelf is requested)
three in compartment D and one in cmpt F, cmpt F not full height
SHELF- COMPARTMENT"A'/RF CABINET: 1
3F-20-1000 < > Shelf, Adjustable,(1), RF Cabt Custom 1
(1) RF Compt"A"/cabt"E1" area, centered.
(change to cabt"E2"for Pureair 1 cabt)
3F-20-1500 < > Shelf, Additional, Adjustable, (1), RF Cab Custom 1
RF Compt"A"/cabt"E2" area, centered.
(change to cabt"E1"for combo unit cabt)
SHELF- COMPARTMENT"B"/"B1": 1
3F-30-1000 > Shelf, Custom, Adj, Cmpt"B", (1) 1
SHELF- COMPARTMENT"D": 1
3F-40-OOSR X < Custom fixed shelf&stairchair pocket 1
Custom fixed shelf &stairchair pocket
Fixed shelf from divider in center to compartment to wall #3 approx. 40" up from
compartment bottom. Below this fixed shelf shall be a fixed divider to form a pocket for
stairchair. This area to be @9"wide below the fixed shelf and wall #3
3F-40-3001 < > Shelf, Custom, Adj, Cmpt"D", (1), Std Model only 1
at bottom of cabt"H" inside/outside access opening.
05/14/2015 09:21:25 WO#: Pa e 6
PART NO S DESCRIPTION QTY
SHELF- COMPARTMENT"E": 1
3F-50-0100 < Shelf, Fixed, Cmpt E, for Electrical storage, w/ Divider 1
Area to right of divider will be used for bio-waste in A/A if selected. If no bio-waste, area
to be left open for addt'l customer storage.
3F-50-0200 Shelf, Fixed, Cmpt E, for Electrical storage, No Divider 1
3F-50-2000 > Shelf, Custom, Adj, Cmpt"E", (1) 1
COMPARTMENT/SHELF, MISC: 1
3F-70-1200 < > Upgrade,Shelf/Div to 3/16",W/1" Lips, ILOS 5
Location:
WINDOWS: 1
3P-10-5201 > Window,Upper,CS/Slider,Rr/Fixed,Priv Tint,PAN,Std Model only 1
MODULE ENTRY DOOR HANDLES: 1
3U-30-8000 Handles, Patient Entry, Trimark Black/Chrome "SafePass" STD 1
EXTERIOR COMPT DOOR HANDLES: 1
3U-40-0510 > Handle, Module Compt, Trimark, Black/Chrome, STD 7
3U-40-0514 < > Latch, Paddle, Trimark, For Trailing Door 2
compts "D" &/or"E"
DOOR HOLD OPENS: 1
40-10-1602 < > Hold Opens,Rr Doors,Cast,Grabber (2),4.5", Std Model only 1
'Install so that doors will open as wide as possible.'
Mount at top of doors.
40-10-7200 Hold Open, Gas Strut, Ext Compt, 301b, Std 6
40-10-7205 Hold Open, Gas Strut, RF Compt, 301b, Std 1
DOOR PANELS: 1
45-10-4505 < > Panels, Entry, Durasafe, Stainless Steel, w/Chevrons, STD 1
- Durasafe Design
-Aluminum Center Panels covered: white/red reflective tape
FENDER FLARES: 1
4A-10-3001 > Flare, Fender, Bright Finish, Std Model only 1
BUMPERS: 1
4F-11-3000 Dock Bumpers, Black, On Rear, Mods 1
4F-12-0002 < > Bumper,Rear,Frtlnr/Int'I,Std,W/Skids &WILED DOT lights, St 1
(not C4500)
w/Gator Grip on flip up step.
Reinforced, std on MAV
SKIRTRAILS 1
4U-10-6000 Skirtrails, Diamond Plate, 170in Box, Frtlnr/Sterling 1
STONE GUARDS(FRONT): 1
4U-11-7000 Stone Guard, Frt, Diamond Plate, 17", Frtlnr/Sterling 1
KICKPLATES (w/STD. REAR STONEGUARDS): 1
50-10-7010 > Kickplate, W/Recess & (3) Truck Lights, Duraseam 1
RECOVERY DEVICES 1
50-12-1000 > Tow Eyes, Black, in Rear Kickplate 1
55-10-3000 < Holder, License Plate, Cast, C30002, STD 1
- in rear kick plate, centered
SILL PROTECTORS 1
55-30-4001 Sill Protectors, Stainless, All Compts, Std Model only 1
MODULE STEPWELL: 1
55-90-6030 < Stepwell, Double Step, ILOS, MAV 1
(new code)
05/14/2015 09:21:25 WO#: Pa e 7
PART NO S DESCRIPTION QTY
MUD FLAPS: 1
5A-10-1001 Mud Flaps, Rear, W/Logo, Std Model only 1
PAINT/BELTS: 1
5F-10-3600 > Paint, Multi-Color, Labor Charge 1
5F-10-3700 < > Paint, Entire Units, MAV Units, Red &/or Metallic 1
Color:
Sikkens paint code#
Send sprayout for approval to:
Do Not paint unit until sprayout is approved !!!!
Top 2' of mod to remain white. Cab to be painted red from just above cab door handles
and downward
5F-10-4801 < Paint, Belt, None, Std Model only 1
Cab& Module, all white, std.
CHEVRON PACKAGES INSTALLED: 1
5K-12-0022 < > Chevron Striping, Full Rear including doors, 6" Diamond Grade Reflective 1
To be installed by 24/7 Graphics
COLORS: Red/yellow
DECAL PACKAGES INSTALLED: 1
5P-10-5001 Roof Star, White Border, Installed, Std Model Only 1
ELECTRICAL SYSTEM: Circuitboard 1
COAX CABLES/ANTENNAS: 1
65-10-3001 < > Coax Cable, RG58/U, (1), Additional, Std Model only 1
- From module roof port number#1 to behind
the passenger seat Standard - with 6' pigtails
65-30-1000 < > Coax Cable, RG58/U, (1) Each, Standard, Terminate: 1
- From module roof port number#3 to behind passenger seat
standard - with 6' pigtails
65-30-6500 > Base-Antenna, Motorola Mount, W/Coax 1
12VDC POWER SOURCES& OUTLETS: 1
6A-22-200E < > Outlet, Cigar Lighter, STD, (2), A/A 1
- on standard 20-amp ignition hot circuit. ("elect batt sw")
6A-22-2500 < > Outlet, Cigar Lighter, IATS, (1) 2
(1) portable equipment charging circuit-front console
(1) portable equipment charging circuit-front console
6A-22-5100 < Outlet, Dual USB Port, 5VDC, 2.1 Amp output, Standard 1
Located on the passenger side of the center console, per Electrical Engineering
POWER SOURCE, 12 VDC 1
6A-23-0910 < Power Source, 12VDC, 20A, Ignition/Shoreline Hot 1
20amp 12 volt DC circuit ran to two locations, (1) pre-wire coil and tagged in action area
and (1) pre-wire coil and tagged behind driver's seat.
6A-23-1201 < > Power Source,12 VDC,15 Amp (+-), Std Model only 1
- Ignition hot, terminating in cab console
- with 6 foot tails (hot and ground).
05/14/2015 09:21:25 WO#: Pa e 8
PART NO S DESCRIPTION QTY
6A-23-2200 < > Power Source,12 VDC,20 Amp (+-) 3
- Powered by: Hot
6A-23-3000 < > Power Source,12 VDC,30 Amp (+-) 2
- Powered by: Hot
6A-23-3001 < > Power Source,12 VDC,30 Amp (+-), Std Model only 1
- Constant Hot, to terminate behind the passenger seat
-with 6 foot tails (hot and ground).
ELECTRICAL ACCESSORIES 1
6E-10-SR01 X < camara, color, (4), with (1) color LCD 1
camera, color, (4), with (1) color LCD
(SO-CAM-279085)
Wire/set up per Electrical Engineering
Ignition hot
Monitor right side of dash board
(1) Camera on rear of module, off center toward driver's side, to activate when in reverse
(1) Camera on rear coleman
(1) Camera on left cab door, activated by left turn signal
(1) Camera on right cab door, activated by right turn signal
SHORELINE INLETS: 1
6F-80-3605 < > Auto Eject,Kussmaul,20A,White cover,IATS 1
above compt"E"
6F-90-4101 < > Super Auto Eject,20 amp, ILOS, White, Std Model Only 1
-with white cover; mounted above compartment"E"
110 VAC OUTLETS: 1
6K-40-1000 < Outlet, 110 VAC, Duplex, (2), STD 1
- (1) outlet in action area
- (1) outlet in extended action area
6K-40-1500 Outlet, 110 VAC, Duplex, in A/A, IATS 3
6U-10-5000 < Battery Charger, Conditioner, Progressive Dynamics, PD9130 1
Charger/Conditioner mounted in Comp"E"
61J-10-9000 < Battery Charger, Iota#DLS-45, 45 amp 1
(regulated battery charger)
INVERTERS: 1
7F-10-9000 < > Inverter/Charger, Vanner 20-1050CUL-DC 1
- Mounted on fixed shelf or ceiling in Compartment"E"
DO-10-6500 < Alarm, Low Voltage, Audio/Visual 1
Light in cab console and Buzzer in cab.
DA-11-3000 < > Sequencer,Kussmaul,Load Manager, W/Switch 1
W/Sequencer switch and override on console
SIRENS: 1
DK-10-1650 Siren,Federal,Signal EQ2B,ILOS 1
SWITCHING OPTIONS FOR AIR HORNS &SIRENS: 1
DP-11-1000 Switch, Siren/Horn Thru Horn Ring 1
DP-11-1500 Switch, Air Horn/Horn Thru Horn Ring. 1
DP-11-2500 Switches, Foot (2),(1) Dr Side,(1) Pass 1
05/14/2015 09:21:26 WO#: Pa e 9
PART NO S DESCRIPTION QTY
AUDIBLE ALARMS: 1
FO-11-3501 Alarm, Back-Up, Auto Reset, Std Model only 1
VEHICLE EXTERIOR LIGHTING 1
FF-10-OOSR X < Whelen, Edge Ultra 28.25" Freedom L/B's 2
Whelen, Edge Ultra 28.25" Freedom L/B's
Two (2) 28.25" Edge Ultra Freedom LED Lightbars mounted on Cab
Lightbars to be field programmable
(2) FT8 Series each includes (all front facing)
(2) Red Super LEDs/lenses
(2) Clear Super LED/Lens
Order of LED/tense is R/W/R/W W/R/W/R
One switch in front switch panel for both Lightbars
FF-10-6000 < > Cab Headliner Removal Fee, MAV 1
for lightbar installation
WHELEN 45KKK ADVANTAGE PLUS LIGHT BAR 1
WHELEN SUPER LED 9L SINGLE ROW FLASHING LIGHTS T1,3,9: 1
FU-40-0100 > Light, 9L, Super LED, Whelen, Red, Red LenS,ILOS, 90RR5FRR 8
FU-40-0101 > Light, 9L, Super LED, Whelen, Red, Red Lens,IATS, 90RR5FRR 2
FU-40-0112 > Light, 9L, Super LED, Whelen,Amber,Amber LenS,ILOS, 90AA5FAR 1
FU-40-0113 > Light, 9L, Super LED, Whelen,Amber,Amber Lens,IATS, 90AA5FAR 2
WHELEN SUPER LED 7L LIGHTS W/FLASHERS: 1
H5-58-0320 > Light, 7L, Super LED, Whelen, Red, Clear Lens, ILOS,70R02FCR 4
H5-58-0385 < > Light, 7L, Super LED, Whelen, R/C, Clear Lens,IATS, 70RC6FCR 2
(cannot be wired thru an external flasher)
7 SERIES SUPER LED STEADY BURN LIGHTS: 1
H5-58-0515 Light, 7L, Super LED, Red, Red Lens, IATS, 70R02SRR 2
H5-58-0575 Light, 7L, Super LED, Clear, IATS, 70CO2SCR 6
WHELEN FLANGES 7 SERIES LIGHTS 1
H5-59-1000 < Flange, Whelen, For 7E lights (1), Mods 4
- For 7 Series Lights
CORNER CAP LIGHTS 1
HF-11-6049 < Corner Cap Lts,Multi-LED,(2)Amber(2)Red w/Flashers,Std Model 1
- High intensity flashers; thru separate switch
CLEARANCE LIGHTS: 1
HF-12-9100 Light, Clearance, Amber LED, ILOS 3
HF-12-9601 < Light, Clearance, Red LED, Std Model only 1
-On rear as clearance lights.
HF-12-9700 Light, Clearance, Red LED, IATS 2
SCENE AND LOAD LIGHTS 1
HK-20-110E < Light, Halogen, Whelen, 9H, Clear, 8-32 Deg, STD, (1) 4
- (2) each side as scene lights
HK-20-130E < Light, Halogen, Whelen, 9H, Clear, 8-32 Deg, STD, (1) 2
- (2) on rear as load lights
HU-11-2500 < Brake Override Circuit 1
(Must use IATS Stop/tail lights with this option)
HU-11-8500 < > Automatic Secondary, Park/Neutral, W/Momentary Switch, Auto Reset 1
the circuit would automatically reset when the gear shift lever is placed back into gear.
WARNING LIGHT FLASHERS 1
HU-24-6400 < > Flasher, Vanner, 9860GCPE, Standard 1
Flash Pattern will be Dual Burst unless otherwise Noted
05/14/2015 09:21:26 WO#: Pa e 10
PART NO S DESCRIPTION QTY
Rated at 140 total amps with one flasher for Halogen, LED and Selectable lamps.
(Available flash Patterns are Single Burst, Dual Burst, Triple Burst, and Quad Burst.)
HARNESS LAYOUT: 1
J5-13-3000 Mod Ty 1 Vanner/Weldon "E" Spec, No LB 1
STOP/TURN/TAIL LIGHTS: 1
JA-10-1200 Light, License Tag, (2), Trucklite#15205 LED, ILOS 1
JA-13-8010 < Tailights, Whelen,LED Stop/Tail,Halogen/Backup, w/WC logo 1
- Brake-Alert Flash before the steady Burn
-Turn Arrow—sequential arrow
MODULE OVERHEAD HEADLINER: 1
X-1 0-5510 Headliner, Flat, Expanded PVC, 160"+ MAV/Type 1 1
12VDC INTERIOR LIGHTING: 1
JP-10-0505 Lights, Weldon, 8046-0320-80, (4) S/S, (3) C/S 1
JP-10-7005 Light, Stepwell, Trucklite, 2in, Std 1
JP-10-8000 Light, Xantech, 105-500, 5 Inch,ln A/A 1
12VDC INTERIOR LIGHTING - FLUORESCENT: 1
JP-16-1206 < > Lights, Fluor,Thinlite#766,18IN,(3),W/Sw, Std Model Only 1
(must change to surface mount if"ducted"A/C system)
Recessed, 18"
Mount in liner positions F, G, and H
With switch in A/A.
LIGHTS& MISCELLANEOUS: 1
JR-50-1000 Spotlight, Handheld, 100,000 CP 1
JR-50-1500 Spotlight Remote,Guest, RCS-100 1
JR-50-2600 < > Lights, (2) 4in, to Illum Running Boards, Constant Hot 1
activated with the cab doors.
JR-60-2003 < > Timer, Momentary Sw,15 Minute, Constant Hot, Std Model only 1
(must have ECX timed battery switch with this option)
Mount switch on C/S wall at the head of the squad bench
in the standard location. Switch to allow activation and
also deactivation. Wire to fluorescent lights in liner.
JR-70-0005 < Light, in Circuit Board Area, for Electrical Troubleshooting 1
-with integral switch; wired constant hot.
JU-10-1000 < > Conduit, 1.25 Inch 1
FROM:
TO:
w/ Pull Wire, 12 ga, length equals conduit length plus 4 feet.
RADIOS STEREOS &SPEAKERS: 1
LA-10-2500 < > Speakers, Rear, (2), in Liner, w/Volume Control 1
volume control in action area.
LF-10-OOSR X < David Clark System 1
David Clark System -Wheeled Coach to provide and install David Clark System
Master module (1) U-3800, PTT Module, (1) U3811-U3802
Mount U-3801 curbside action area
05/14/2015 09:21:26 WO#: Pa e 11
PART NO S DESCRIPTION QTY
power cord C-3820
radio interface cable (1) C-3821
intercom cable (2) C-3812
intercom cable (2) C-3825
Dual ear headsets (3) H-3442
LF-10-5000 < Intercom, Silent, (3) Lights W/Buzzer 1
switches in action area, buzzer and lights in
cab console.
SUCTION PUMPS: 1
LP-10-2000 Suction Pump, Upgrade 1
INSULATION: 1
LU-10-1000 Insulation, Fiberglass, Unfaced 1
LU-10-3001 < > Insulation, Severe Weather Package 1
one inch block foam in modular walls and roof covered with reflective insulation.
Under Floor to be Spray Foam insulated after the production assembly process is
complete by 24/7.
All edges of reflective insulation on walls and ceiling must be taped, std.
OVERHEAD GRABRAIL: 1
NO-10-9101 < Grabrai1,Overhead,117",Handicap Style,Yellow,Std Model Only 1
Yellow Powder Coat Finish
NO-10-9703 < Handrai Is,(3),Custom "L" Shape,l",Yellow,Entry Drs,Std Model 1
-Yellow Powder Coat Finish Stainless Steel Grab Handles
02 CYLINDER RACKS: 1
NA-10-2500 > Rack, Cylinder, Ziamatic, "M", QRM-2 1
02 SYSTEMS COMPLETE: 1
NF-50-1001 < > 02 Sys,LF,(2)O2/(1)Vac Port A/A,(1)O2 C/S, Std Model only 1
Ohio style
(2) oxygen outlets in action area
(1) vacuum port in action area
(1) oxygen outlet curbside wall at head of squad bench
NU-56-1850 < > 02 Outlet, Additional, Ohio, Terminate, Mods 1
LOCATION:
NU-56-1950 < > 02 Outlet, Additional, Ohio, Passive, Mods 1
LOCATION:
02 SYSTEM PARTS: 1
PO-59-7500 < Regulator, Oxygen Cylinder, Preset 50PSI, Installed 1
(new code)
SUCTION CONTAINERS: 1
PA-10-7001 > Regulator/Holder, SSCOR 22000, Std Model only 1
COT MOUNTS: 1
PF-26-3100 > Cot Mount, Stryker#6377, Dual Position 1
IV HOOKS: 1
PP-20-1000 < > IV Hook, Perko, (1), W/Straps, STD 2
05/14/2015 09:21:26 WO#: Pa e 12
PART NO S DESCRIPTION QTY
curbside and streetside standard locations
PP-20-1500 > IV Hook, Perko, (1), W/Straps, IATS 1
PU-10-1000 Kickplate, Brushed S/S, Face Of Squad Bench 1
PU-10-2000 Kickplate, Brushed S/S, On Face of Basewall 1
RA-10-1000 > Dri Deck, Red, All Compt. Floors and Shelves 1
HOLDER, CYLINDER: 1
RF-11-5000 > Holder, Cylinder, Single Floor, Ferno#521, Installed 1
MODULE INTERIOR 1
RU-05-0000 Interior Cabinets - Duralite Construction, Wood 1
MICA COLOR: 1
RU-10-3010 Mica, Gray Pampas#4168-01, High Gloss 1
SUB FLOORING: 1
RZ-99-0100 > Floor, Interior, Non Wood, Type 3/9, ILOS 1
FLOORING: 1
TO-11-8201 Flooring, Lonplate II,Gunpowder Grey#424TX, Std Model only 1
SEAMLESS ATTENDANT SEATS: 1
T5-10-OOSR X < EVS Seat w/5 point harness 1
EVS seat w/5 point harness
EVS hi back 1880 5pt, EVS seat w/ 188s base
T5-10-5111 < Seat, Attendant, EVS, Child,Gunmetal#1880CB, Std Model only 1
Vacuum formed EVS1880CB w/3 point seatbelt.
Integrated child safety seat.
Mounted metal box base.
SEAMLESS UPHOLSTERY: 1
T5-25-0500 < Uph, Smless, Gunmetal,No Bio,No Post&Wheel 1
custom layout
BULKHEAD CABINET: 1
TF-50-1200 Cabinet, BH, Frtlnr, Non-WT, EMS- F/R MAV, W/72"HR 1
02 DOOR: 1
TK-10-4000 Wrap Around Plexi W/Hinge, MAV's 1
GLOVE HOLDERS: 1
TN-20-1001 < Cabinet, Glove Box Holder,(3),Above C/S door, Std Model only 1
(narrows cabt"E1" on Pureair 1 w/low headroom)
RIGHT FRONT CABINET: 1
TU-19-SR10 XS < > Cabinet, RF, Combo, EMS MAV, Custom 1
SR#215484F
RF CABINET DOORS W/PUREAIR A/C 1
TU-20-9100 Door, Single Wood, Hinged Right, RF Cab 1
TU-2I-OOSR X < Custom Basewall Cabinets 1
Custom basewall cabinets
custom H narrow height above Cmpt D, custom K cabinet & L1 cabinet. Second action
area to the rear of custom cabinet N, large O& P combined
Slide out writing tray beneath action area counter
Electrical cabinet on rear of Cmpt F
TU-21-01 SR X < custom c/s cabinet and squad bench 1
Custom C/S cabinet&Squad Bench
05/14/2015 09:21:26 WO#: Pa e 13
PART NO S DESCRIPTION QTY
at the rear edge of c/s forward door is the ALS cabinet. To have roll up door inside/outside
access to ALS cmpt
Above ALS is drug box @25.75" wide x 19.25" tall. Line top, bottom and both sides w/
stainless steel.
Rear of ALS upper to be glove box holder. Wooden door w/plexi cut outs for four glove
boxes. Latch lever to open cabinet door.
Below glove box holder is the C/S action area control panel. This control panel is the std
control panel relocated to C/S
this panel to have 12v, 110V, A/C thermostat, and radio control head
Action area to be recessed for pelican 1500 case, w/roll up door to cover recessed pelican
case
Tilt out sharps case towards action area. Area above sharps to have 4 sections w/ plexi
dividers
EVS 1787 5 pt seat located in squad bench
custom squad bench with two sections forward section to have flip up lid for trash storage
custom anlged R2 cabinet above rear section of squad bench
LEFT FRONT CABINET: 1
TU-50-2100 < > Cabinet, Left Front, EMS F/R, MAV, W/72" H.R. 1
Full height cabt behind attendant's seat for circuit board. No cabt"S".
HARDWARE,LATCHES AND LOCKS: 1
VO-10-0500 < > Handle, C, Pull, Installed,(1) Ea,STD 1
-RF Cabinet(s)
VO-10-2000 < > Latch, Plunger Roller, Installed 2
-RF Cabinet(s)
VO-14-1001 > Latch, Lever, W/Key, Installed, "L" Cabt Wood Door 1
SQUAD BENCH: 1
V5-20-6110 Squad Bench, 160/170 EMS MAV, No Bio-Waste 1
LID 170 INCH BOX: 1
V5-64-1501 Lid, Squad Bench, Single W/Bio-Waste, 170", Std Model only 1
HARDWARE: 1
V5-80-1005 Handle, Trimark, Squad Bench, STD 1
V5-82-2500 Strut, Gas, 60 LB, Installed, ILOS, Mods 1
CURBSIDE REAR CABINET: 1
VF-20-6100 Cabinet, Curbside Rear,no B2,Rear wall only 1
CABINET H, BASEWALL, 170",T9 1
VH-1-14-0400 H, Cabinet, Deleted 1
CABINET I, BASEWALL 170",T9 1
VH-I4-0400 I, Cabinet, Deleted 1
CABINET M, BASEWALL 160" & 170",T1/T9 1
VH-M2-0100 M, Cabinet, 1/2 height, std 1
CABINET O, BASEWALL 160" & 170",T9 1
VH-02-0100 O, Cabinet, full height, std 1
CABINET CPR, BASEWALL, 160" & 170",T9 1
VH-Q1-0100 CPR, side seat, std 1
VH-Q1-0350 CPR, side seat, flip up lid, Standard Model Only 1
CABINET J, STREETSIDE UPPER 170", T9 1
VI-J4-0200 J, Cabinet, deleted 1
CABINET K, STREETSIDE UPPER 160"& 170", T9 1
VI-K3-0210 K, Cabinet, 72" H.R. with full height"D" 1
CABINET L, STREETSIDE UPPER 160" & 170", T9 1
VI-1-2-0150 L, Cabinet, L1, L2, L3, std, 72" H.R. 1
05/14/2015 09:21:26 WO#: Pa e 14
PART NO S DESCRIPTION QTY
BASEWALL DOORS: 1
VK-16-1000 Cab M, Gray Lexan Slider 1
VK-16-5000 Cab O, Gray Lexan Slider 1
TELEMETRY AREA WORK SURFACE 1
VP-10-5461 Telemetry Tray, Poured, Gray 1
ACTION AREA WORK SURFACE 1
VP-10-5918 < > A/A Tray, 160"-1 70",W/0 Bio,Poured, Gray, MAV/1170F/1170D 1
(new code)
It will be necessary for the right end of poured tray to
be cut off. There will be no raised ledge on right end
of poured tray. Caulk/sealant to be applied.
ACTION AREA CABINET: 1
VP-15-9500 < Cabinet, A/A, EMS MAV, No Biowaste 1
(poured A/A tray will not fit in MAV unless wood buildup is added at forward end)
with rounded corner package
VU-14-4000 > Shelf, Interior, Adj, in Cabinet: 3
VU-14-4000 > Shelf, Interior, Adj, in Cabinet: 1
VU-14-4000 > Shelf, Interior, Adj, in Cabinet: 1
VU-14-4001 < > Shelf Track, Cabt, #HA24663, Upgrade, Std Model only 4
("C"channel/exterior shelf style track)
"This option may require quantity adjustment"
VU-15-4000 Cab"K" Gray Lexan Slider 1
VU-15-9000 < Cab"L1"Wood Door 1
hinged on right.
VU-16-3000 Cab"12" Gray Lexan Slider 1
VU-16-7000 Cab"13" Gray Lexan Slider 1
SHIP LOOSE ITEMS: 1
YY-10-6400 Ship Loose, W.C. Standard Items 1
YY-13-2000 Fire Extinguisher. (1) 5 LB. ABC, IATS, Ship Loose 1
WARRANTIES 1
ZZ-10-0101 Warranty, Conversion, 12 Month 1
ZZ-10-0201 Warranty, Paint, 60 month Prorated, Standard 1
ZZ-10-0300 Warranty, Structural, 15 Years, Std., Mods 1
ZZ-10-0601 Warranty, Limited Electrical 1
ZZ-10-0701 Warranty, Cabinet Construction 1
ZZ-ZZ-0200 > End Of Order 1